昭和风机_showa denki_昭和电机株式会社

Feature & Specifications

Air foil Fan

Sirocco Fan

Model	Discharge flange diameter (mm)	Charge flange out diameter (mm)	Output (KW)
K1D08	240x300	φ325	0.75×2.2
K1D10	300x380	φ400	2.2、3.7
K1D12	360x460	φ475	0.75、1.5、5.5
K1D14	420x540	φ540	1.5×3.7
K1D16	480x610	φ625	3.7×7.5
K1D18	540x690	φ700	5.5×11
K1D20	600x770	φ810	11×18.5
K1D22	660x850	φ890	15、18.5

Model	Discharge flange diameter (mm)	Charge flange out diameter (mm)	Output (KW)
Ｍ2Ｄ06	180x230	φ240	0.75、1.5
Ｍ2Ｄ08	240x300	φ325	0.75×5.5
Ｍ2Ｄ10	300x380	φ400	1.5×15
Ｍ2Ｄ12	360x460	φ475	3.7×11
Ｍ2Ｄ14	420x540	φ540	7.5×18.5

Turbo fans

Turbo Blower

Model	Discharge flange diameter (mm)	Charge flange out diameter (mm)	Output (KW)
T1D08	2７0x190	φ265	1.5、2.2
T1D10	340x205	φ335	3.7×7.5
T1D12	400x245	φ400	7.5×18.5
T1D14	470x285	φ475	15×30
T2D08	270x190	φ265	0.75、1.5
T2D10	340x205	φ335	1.5×3.7
T2D12	400x245	φ400	3.7×11
T2D14	470x285	φ475	7.5×15、22
T2D16	540x325	φ540	15×22

Model	Discharge flange diameter (mm)	Charge flange out diameter (mm)	Output (KW)
B1D14	88x70	JIS 5K 150A _166.6	2.2、3.7
B1D15	110x80	JIS 5K 200A _218	3.7、5.5
B1D16	131x100	JIS 5K 200A _218	5.5、7.5
B1D17	156x125	JIS 5K 200A _218	7.5、11
B1D18	200x160	JIS 5K 250A _269.5	11、18.5
B1D19	250x200	JIS 5K 300A _321	18.5、30
B1D20	300x250	JIS 5K 300A _321	30、45

Maintenance Simplification
Maintenance-free. No adjustment required, with only a few consumable goods and accessories.
1.	Since the impeller and electric motor axle are directly coupled, there is no need to adjust belt tension or exchange belts.
2.	The electric motors in this series use a sealed bearing so there is no need to re-grease.
3.	The bearing is longer lasting compared to belt driven machines.
4.	Drive unit can be pulled out from the back with the impeller on, so the rotor can be taken down and repaired easily without taking off the intake and discharge pipes.
NOTICE If there is a foundation bolt implanted into the ground, you cannot pull out the drive unit by sliding it towards the back. (If you would like to have the drive unit to be pulled out by sliding towards the back, we can make special orders.) You may have to take off the electric wirings of the electric motor due to the electric wirings∏ position.

Saving space

The electric blower occupies less space.
Compared to belt driven machines, the space is reduced by up to 50%.

High safety

Considering safety, there are no exposed rotating parts.